CREATE TABLE PARTITION

Function

CREATE TABLE PARTITION creates a partitioned table. Partitioning refers to splitting what is logically one large table into smaller physical pieces based on specific schemes. The table based on the logic is called a partitioned table, and each physical piece is called a partition. Data is stored on these physical partitions, instead of the logical partitioned table.

The common forms of partitioning include range partitioning, interval partitioning, hash partitioning, list partitioning, and value partitioning. Currently, row-store tables support range partitioning, interval partitioning, hash partitioning, and list partitioning. Column-store tables support only range partitioning.

In range partitioning, a table is partitioned based on ranges defined by one or more columns, with no overlap between the ranges of values assigned to different partitions. Each range has a dedicated partition for data storage.

The partitioning policy for range partitioning refers to how data is inserted into partitions. Currently, range partitioning only allows the use of the range partitioning policy.

In range partitioning, a table is partitioned based on partition key values. If a record can be mapped to a partition, it is inserted into the partition; if it cannot, an error message is returned. Range partitioning is the most commonly used partitioning policy.

Interval partitioning is a special type of range partitioning. Compared with range partitioning, interval value definition is added. When no matching partition can be found for an inserted record, a partition can be automatically created based on the interval value.

Interval partitioning supports only table-based partitioning of a list where the data type can be TIMESTAMP[(p)] [WITHOUT TIME ZONE], TIMESTAMP[(p)] [WITH TIME ZONE] and DATE.

Interval partitioning policy: A record is mapped to a created partition based on the partition key value. If the record can be mapped to a created partition, the record is inserted into the corresponding partition. Otherwise, a partition is automatically created based on the partition key value and table definition information, and then the record is inserted into the new partition. The data range of the new partition is equal to the interval value.

In hash partitioning, a modulus and a remainder are specified for each partition based on a column in the table, and records to be inserted into the table are allocated to the corresponding partition, the rows in each partition must meet the following condition: The value of the partition key divided by the specified modulus generates the remainder specified for the partition key.

In hash partitioning, table is partitioned based on partition key values. If a record can be mapped to a partition, it is inserted into the partition; if it cannot, an error message is returned.

List partitioning is to allocate the records to be inserted into a table to the corresponding partition based on the key values in each partition. The key values do not overlap in different partitions. Create a partition for each group of key values to store corresponding data.

In list partitioning, table is partitioned based on partition key values. If a record can be mapped to a partition, it is inserted into the partition; if it cannot, an error message is returned.

Partitioning can provide several benefits:

  • Query performance can be improved drastically in certain situations, particularly when most of the heavily accessed rows of the table are in a single partition or a small number of partitions. Partitioning narrows the range of data search and improves data access efficiency.
  • In the case of an insert or update operation on most portions of a single partition, performance can be improved by taking advantage of continuous scan of that partition instead of partitions scattered across the whole table.
  • Frequent loading or deletion operations on records in a separate partition can be accomplished by reading or removing that partition. It also entirely avoids the VACUUM overload caused by bulk DELETE operations (Hash partitions cannot be deleted.).

Precautions

  • If the constraint key of the unique constraint and primary key constraint contains all partition keys, a local index is created for the constraints. Otherwise, a global index is created.
  • Currently, hash partitioning and list partitioning support only single-column partitioning, and do not support multi-column partitioning.
  • When you have the INSERT permission on an interval partitioned table, partitions can be automatically created when you run INSERT to write data to the table.
  • In the PARTITION FOR (values) syntax for partitioned tables, values can only be constants.
  • In the PARTITION FOR (values) syntax for partitioned tables, if data type conversion is required for values, you are advised to use forcible type conversion to prevent the implicit type conversion result from being inconsistent with the expected result.
  • The maximum number of partitions is 1048575. Generally, it is impossible to create so many partitions, because too many partitions may cause insufficient memory. Create partitions based on the value of local_syscache_threshold. The memory used by the partitioned tables is about (number of partitions x 3/1024) MB. Theoretically, the memory occupied by the partitions cannot be greater than the value of local_syscache_threshold. In addition, some space must be reserved for other functions.
  • Currently, the statement specifying a partition cannot perform global index scan.

Syntax

CREATE TABLE [ IF NOT EXISTS ] partition_table_name
( [ 
    { column_name data_type [ COLLATE collation ] [ column_constraint [ ... ] ]
    | table_constraint
    | LIKE source_table [ like_option [...] ] }[, ... ]
] )
    [ AUTO_INCREMENT [ = ] value ]
    [ WITH ( {storage_parameter = value} [, ... ] ) ]
    [ COMPRESS | NOCOMPRESS ]
    [ TABLESPACE tablespace_name ]
    [ COMMENT {=| } 'text' ]
     PARTITION BY { 
        {RANGE (partition_key) [ INTERVAL ('interval_expr') [ STORE IN (tablespace_name [, ... ] ) ] ] ( partition_less_than_item [, ... ] )} |
        {RANGE (partition_key) [ INTERVAL ('interval_expr') [ STORE IN (tablespace_name [, ... ] ) ] ] ( partition_start_end_item [, ... ] )} |
         {LIST (partition_key) ( PARTITION partition_name VALUES (list_values) [TABLESPACE tablespace_name][, ... ])} |
        {HASH (partition_key) ( PARTITION partition_name [TABLESPACE tablespace_name][, ... ])}
        {RANGE (partition_key) [ INTERVAL ('interval_expr') [ STORE IN (tablespace_name [, ... ] ) ] ] ( partition_less_than_item [COMMENT {=| } 'text'][...][, ... ] )} |
        {RANGE (partition_key) [ INTERVAL ('interval_expr') [ STORE IN (tablespace_name [, ... ] ) ] ] ( partition_start_end_item [COMMENT {=| } 'text'][...][, ... ] )} |
        {LIST | HASH (partition_key) (PARTITION partition_name [VALUES (list_values_clause)] opt_table_space [COMMENT {=| } 'text'][...])}
    } [ { ENABLE | DISABLE } ROW MOVEMENT ]; 
  • column_constraint is as follows:

    [ CONSTRAINT constraint_name ]
    { NOT NULL |
      NULL | 
      CHECK ( expression ) | 
      DEFAULT default_e xpr | 
      GENERATED ALWAYS AS ( generation_expr ) STORED |
      AUTO_INCREMENT |
      UNIQUE index_parameters | 
      PRIMARY KEY index_parameters |
      REFERENCES reftable [ ( refcolumn ) ] [ MATCH FULL | MATCH PARTIAL | MATCH SIMPLE ]
            [ ON DELETE action ] [ ON UPDATE action ] }
    [ ENABLE [VALIDATE | NOVALIDATE] | DISABLE [VALIDATE | NOVALIDATE] ]
    [ DEFERRABLE | NOT DEFERRABLE | INITIALLY DEFERRED | INITIALLY IMMEDIATE ]
    [ COMMENT {=| } 'text' ]
    
  • table_constraint is as follows:

    [ CONSTRAINT [ constraint_name ] ]
    { CHECK ( expression ) | 
      UNIQUE [ index_name ][ USING method ] ( { column_name [ ASC | DESC ] } [, ... ] ) index_parameters | 
      PRIMARY KEY [ USING method ] ( { column_name [ ASC | DESC ] } [, ... ] ) index_parameters |
      FOREIGN KEY [ index_name ] ( column_name [, ... ] ) REFERENCES reftable [ ( refcolumn [, ... ] ) ]
          [ MATCH FULL | MATCH PARTIAL | MATCH SIMPLE ] [ ON DELETE action ] [ ON UPDATE action ] }
    [ DEFERRABLE | NOT DEFERRABLE | INITIALLY DEFERRED | INITIALLY IMMEDIATE ]
    [ COMMENT {=| } 'text' ]
    
  • like_option is as follows:

    { INCLUDING | EXCLUDING } { DEFAULTS | GENERATED | CONSTRAINTS | INDEXES | STORAGE | COMMENTS | RELOPTIONS| ALL }
    
  • index_parameters is as follows:

    [ WITH ( {storage_parameter = value} [, ... ] ) ]
    [ USING INDEX TABLESPACE tablespace_name ]
    
  • partition_less_than_item:

    PARTITION partition_name VALUES LESS THAN ( { partition_value | MAXVALUE } ) [TABLESPACE tablespace_name]
    
  • partition_start_end_item:

    PARTITION partition_name {
            {START(partition_value) END (partition_value) EVERY (interval_value)} |
            {START(partition_value) END ({partition_value | MAXVALUE})} |
            {START(partition_value)} |
            {END({partition_value | MAXVALUE})}
    } [TABLESPACE tablespace_name]
    
  • COMMENT {=| } 'text':

    In the partition of a partitioned table, this column is meaningless and is used only for syntax compatibility. An alarm is displayed when the syntax is used in the database.

Parameter Description

  • IF NOT EXISTS

    Sends a notice, but does not throw an error, if a table with the same name exists.

  • partition_table_name

    Specifies the name of a partitioned table.

    Value range: a string. It must comply with the identifier naming convention.

  • column_name

    Specifies the name of a column to be created in the new table.

    Value range: a string. It must comply with the identifier naming convention.

  • data_type

    Specifies the data type of the column.

  • COLLATE collation

    Assigns a collation to the column (which must be of a collatable data type). If no collation is specified, the default collation is used. You can run the select * from pg_collation; command to query collation rules from the pg_collation system catalog. The default collation rule is the row starting with default in the query result.

  • CONSTRAINT constraint_name

    Specifies the name of a column or table constraint. The optional constraint clauses specify constraints that new or updated rows must satisfy for an insert or update operation to succeed.

    There are two ways to define constraints:

    • A column constraint is defined as part of a column definition, and it is bound to a particular column.
    • A table constraint is not bound to a particular column but can apply to more than one column. constraint_name is optional in B-compatible mode (sql_compatibility = 'B'). For other modes, constraint_name must be added.
  • index_name

    Specifies an index name.

    NOTICE:

    • index_name is supported only in B-compatible databases (that is, sql_compatibility = 'B').
    • For foreign key constraints, if constraint_name and index_name are specified at the same time, constraint_name is used as the index name.
    • For a unique key constraint, if both constraint_name and index_name are specified, index_name is used as the index name.
  • USING method

    Specifies the name of the index method to be used.

    For details about the value range, see USING method.

    NOTICE:

    • The USING method is supported only in B-compatible databases (that is, sql_compatibility = 'B').
    • In B-compatible mode, if USING method is not specified, the default index method is btree for ASTORE or ubtree for USTORE.
  • ASC | DESC

    ASC specifies an ascending (default) sort order. DESC specifies a descending sort order.

    NOTICE: ASC|DESC is supported only in B-compatible databases (sql_compatibility = 'B').

  • LIKE source_table [ like_option … ]

    Specifies a table from which the new table automatically copies all column names, their data types, and their not-null constraints.

    Unlike INHERITS, the new table and original table are decoupled after creation is complete. Changes to the original table will not be applied to the new table, and it is not possible to include data of the new table in scans of the original table.

    • Default expressions for the copied column definitions will be copied only if INCLUDING DEFAULTS is specified. The default behavior is to exclude default expressions, resulting in the copied columns in the new table having default values NULL.
    • If INCLUDING GENERATED is specified, the generated expression of the source table column is copied to the new table. By default, the generated expression is not copied.
    • Not-null constraints are always copied to the new table. CHECK constraints will only be copied if INCLUDING CONSTRAINTS is specified; other types of constraints will never be copied. These rules also apply to column constraints and table constraints.
    • Unlike those of INHERITS, columns and constraints copied by LIKE are not merged with similarly named columns and constraints. If the same name is specified explicitly or in another LIKE clause, an error is reported.
    • Any indexes on the original table will not be created on the new table, unless the INCLUDING INDEXES clause is specified.
    • STORAGE settings for the copied column definitions are copied only if INCLUDING STORAGE is specified. The default behavior is to exclude STORAGE settings.
    • If INCLUDING COMMENTS is specified, comments for the copied columns, constraints, and indexes are copied. The default behavior is to exclude comments.
    • If INCLUDING RELOPTIONS is specified, the new table will copy the storage parameter (that is, WITH clause) of the source table. The default behavior is to exclude partition definition of the storage parameter of the source table.
    • INCLUDING ALL contains the meaning of INCLUDING DEFAULTS, INCLUDING CONSTRAINTS, INCLUDING INDEXES, INCLUDING STORAGE, INCLUDING COMMENTS, INCLUDING PARTITION, and INCLUDING RELOPTIONS.
  • AUTO_INCREMENT [ = ] value

    This clause specifies an initial value for an auto-increment column. The value must be a positive integer and cannot exceed 2127-1.

    NOTICE: This clause takes effect only when sql_compatibility is set to B.

  • WITH ( storage_parameter [= value] [, … ] )

    Specifies an optional storage parameter for a table or an index. Optional parameters are as follows:

    • FILLFACTOR

      The fill factor of a table is a percentage from 10 to 100. 100 (complete filling) is the default value. When a smaller fill factor is specified, INSERT operations pack table pages only to the indicated percentage. The remaining space on each page is reserved for updating rows on that page. This gives UPDATE a chance to place the updated copy of a row on the same page, which is more efficient than placing it on a different page. For a table whose entries are never updated, setting the fill factor to 100 (complete filling) is the best choice, but in heavily updated tables a smaller fill factor would be appropriate. The parameter has no meaning for column-store tables.

      Value range: 10–100

    • ORIENTATION

      Determines the storage mode of the data in the table.

      Value range:

      • COLUMN: The data will be stored in columns.

      • ROW (default value): The data will be stored in rows.

        NOTICE: orientation cannot be modified.

    • STORAGE_TYPE

      Specifies the storage engine type. This parameter cannot be modified once it is set.

      Value range:

      • USTORE indicates that tables support the inplace-update storage engine. Note that the track_counts and track_activities parameters must be enabled when the Ustore table is used. Otherwise, space expansion may occur.
      • ASTORE indicates that tables support the append-only storage engine.

      Default value: If no table is specified, data is stored in append-only mode by default.

    • COMPRESSION

      • Valid values for column-store tables are LOW, MIDDLE, HIGH, YES, and NO, and the compression level increases accordingly. The default is LOW.
      • Row-store tables do not support compression.
    • MAX_BATCHROW

      Specifies the maximum number of rows in a storage unit during data loading. The parameter is only valid for column-store tables.

      Value range: 10000 to 60000. The default value is 60000.

    • PARTIAL_CLUSTER_ROWS

      Specifies the number of records to be partially clustered for storage during data loading. The parameter is only valid for column-store tables.

      Value range: greater than or equal to MAX_BATCHROW. You are advised to set this parameter to an integer multiple of MAX_BATCHROW.

    • DELTAROW_THRESHOLD

      A reserved parameter. The parameter is only valid for column-store tables.

      Value range: 0 to 9999

    • segment

      The data is stored in segment-page mode. This parameter supports only row-store tables. Column-store tables, temporary tables, and unlogged tables are not supported. The Ustore storage engine is not supported.

      Value range: on and off

      Default value: off

  • COMPRESS / NOCOMPRESS

    Specifies keyword COMPRESS during the creation of a table, so that the compression feature is triggered in case of bulk INSERT operations. If this feature is enabled, a scan is performed for all tuple data within the page to generate a dictionary and then the tuple data is compressed and stored. If NOCOMPRESS is specified, the table is not compressed. Row-store tables do not support compression.

    Default value: NOCOMPRESS, that is, tuple data is not compressed before storage.

  • TABLESPACE tablespace_name

    Specifies that the new table will be created in the tablespace_name tablespace. If not specified, the default tablespace is used.

  • PARTITION BY RANGE(partition_key)

    Creates a range partition. partition_key is the name of the partition key.

    (1) Assume that the VALUES LESS THAN syntax is used.

    NOTICE: In this case, a maximum of four partition keys are supported.

    Data types supported by the partition keys are as follows: SMALLINT, INTEGER, BIGINT, DECIMAL, NUMERIC, REAL, DOUBLE PRECISION, CHARACTER VARYING(*n_), VARCHAR(*n_), CHARACTER(*n_), CHAR(*n_), CHARACTER, CHAR, TEXT, NVARCHAR, NVARCHAR2, NAME, TIMESTAMP[(p)] [WITHOUT TIME ZONE], TIMESTAMP[(p)] [WITH TIME ZONE], and DATE.

    (2) Assume that the START END syntax is used.

    NOTICE: In this case, only one partition key is supported.

    Data types supported by the partition key are as follows: SMALLINT, INTEGER, BIGINT, DECIMAL, NUMERIC, REAL, DOUBLE PRECISION, TIMESTAMP[(p)] [WITHOUT TIME ZONE], TIMESTAMP[(p)] [WITH TIME ZONE], and DATE.

    (3) Assume that the INTERVAL syntax is used.

    NOTICE: In this case, only one partition key is supported.

    In this case, the data types supported by the partition key are TIMESTAMP[(p)] [WITHOUT TIME ZONE], TIMESTAMP[(p)] [WITH TIME ZONE] and DATE.

  • PARTITION partition_name VALUES LESS THAN ( { partition_value | MAXVALUE } )

    Specifies the information of partitions. partition_name is the name of a range partition. partition_value is the upper limit of a range partition, and the value depends on the type of partition_key. MAXVALUE usually specifies the upper limit of the last range partition.

    NOTICE:

    • Each partition requires an upper limit.
    • The data type of the upper limit must be the same as that of the partition key.
    • In a partition list, partitions are arranged in ascending order of upper limits. A partition with a smaller upper limit value is placed before another partition with a larger one.
  • **PARTITION partition_name {START (partition_value) END (partition_value) EVERY (interval_value)} | **{START (partition_value) END (partition_value|MAXVALUE)} | {START(partition_value)} | {END (partition_value | MAXVALUE)}

    Specifies the information of partitions.

    • partition_name: name or name prefix of a range partition. It is the name prefix only in the following cases (assuming that partition_name is p1):

      • If START+END+EVERY is used, the names of partitions will be defined as p1_1, p1_2, and the like. For example, if PARTITION p1 START(1) END(4) EVERY(1) is defined, the generated partitions are [1, 2), [2, 3), and [3, 4), and their names are p1_1, p1_2, and p1_3. In this case, p1 is a name prefix.
      • If the defined statement is in the first place and has START specified, the range (MINVALUE, START) will be automatically used as the first actual partition, and its name will be p1_0. The other partitions are then named p1_1, p1_2, and the like. For example, if PARTITION p1 START(1), PARTITION p2 START(2) is defined, generated partitions are (MINVALUE, 1), [1, 2), and [2, MAXVALUE), and their names will be p1_0, p1_1, and p2. In this case, p1 is a name prefix and p2 is a partition name. MINVALUE means the minimum value.
    • partition_value: start value or end value of a range partition. The value depends on partition_key and cannot be MAXVALUE.

    • interval_value: width of each partition for dividing the [START, END) range. It cannot be MAXVALUE. If the value of (ENDSTART) divided by EVERY has a remainder, the width of only the last partition is less than the value of EVERY.

    • MAXVALUE usually specifies the upper limit of the last range partition.

    NOTICE:

    1. If the defined statement is in the first place and has START specified, the range (MINVALUE, START) will be automatically used as the first actual partition.
    2. The START END syntax must comply with the following rules:
    • The value of START (if any, same for the following situations) in each partition_start_end_item must be smaller than that of END.
    • In two adjacent partition_start_end_item statements, the value of the first END must be equal to that of the second START.
    • The value of EVERY in each partition_start_end_item must be a positive number (in ascending order) and must be smaller than END minus START.
    • Each partition includes the start value (unless it is MINVALUE) and excludes the end value. The format is as follows: [START, END).
    • Partitions created by the same partition_start_end_item belong to the same tablespace.
    • If partition_name is a name prefix of a partition, the length must not exceed 57 bytes. If there are more than 57 bytes, the prefix will be automatically truncated.
    • When creating or modifying a partitioned table, ensure that the total number of partitions in the table does not exceed the maximum value 1048575.
    1. In statements for creating partitioned tables, START END and LESS THAN cannot be used together.
    2. The START END syntax in a partitioned table creation SQL statement will be replaced by the VALUES LESS THAN syntax when gs_dump is executed.
  • INTERVAL ('interval_expr') [ STORE IN (tablespace_name [, … ] ) ]

    Defines interval partitioning.

    • interval_expr: interval for automatically creating partitions, for example, 1 day or 1 month.

    • STORE IN (tablespace_name [, … ] ): Specifies the list of tablespaces for storing automatically created partitions. If this parameter is specified, the automatically created partitions are cyclically selected from the tablespace list. Otherwise, the default tablespace of the partition table is used.

    NOTICE: Column-store tables do not support interval partitioning.

  • PARTITION BY LIST(partition_key)

    Create a list partition. partition_key is the name of the partition key.

    • For partition_key, the list partitioning policy supports only one column of partition keys.
    • If the clause is VALUES (list_values_clause), list_values_clause contains the key values of the corresponding partition. It is recommended that the number of key values of each partition be less than or equal to 64.

    Partition keys support the following data types: INT1, INT2, INT4, INT8, NUMERIC, VARCHAR(*n_), CHAR, BPCHAR, NVARCHAR, NVARCHAR2, TIMESTAMP[(*p_)] [WITHOUT TIME ZONE], TIMESTAMP[(p)] [WITH TIME ZONE], and DATE. The number of partitions cannot exceed 64.

    In version 2.0.0, when a list partition is created, the partition key cannot be DEFAULT; otherwise, the message “Un-support feature” is displayed.

  • PARTITION BY HASH(partition_key)

    Create a hash partition. partition_key is the name of the partition key.

    For partition_key, the hash partitioning policy supports only one column of partition keys.

    Partition keys support the following data types: INT1, INT2, INT4, INT8, NUMERIC, VARCHAR(*n_), CHAR, BPCHAR, TEXT, NVARCHAR, NVARCHAR2, TIMESTAMP[(*p_)] [WITHOUT TIME ZONE], TIMESTAMP[(p)] [WITH TIME ZONE], and DATE. The number of partitions cannot exceed 1048575.

  • { ENABLE | DISABLE } ROW MOVEMENT

    Sets row movement.

    If the tuple value is updated on the partition key during the UPDATE action, the partition where the tuple is located is altered. Setting this parameter enables error messages to be reported or movement of the tuple between partitions.

    Value range:

    • ENABLE (default value): Row movement is enabled.
    • DISABLE: Row movement is disabled.
  • NOT NULL

    The column is not allowed to contain null values. ENABLE can be omitted.

  • NULL

    Specifies that the column is allowed to contain null values. This is the default setting.

    This clause is only provided for compatibility with non-standard SQL databases. It is not recommended.

  • CHECK (condition) [ NO INHERIT ]

    Specifies an expression producing a Boolean result where the insert or update operation of new or updated rows can succeed only when the expression result is TRUE or UNKNOWN; otherwise, an error is thrown and the database is not altered.

    A check constraint specified as a column constraint should reference only the column's values, while an expression appearing in a table constraint can reference multiple columns.

    A constraint marked with NO INHERIT will not propagate to child tables.

    ENABLE can be omitted.

  • DEFAULT default_expr

    Assigns a default data value for a column. The value can be any variable-free expressions. (Subqueries and cross-references to other columns in the current table are not allowed.) The data type of the default expression must match the data type of the column.

    The default expression will be used in any insert operation that does not specify a value for the column. If there is no default value for a column, then the default value is null.

  • GENERATED ALWAYS AS ( generation_expr ) STORED

    This clause creates a column as a generated column. The value of the generated column is calculated by generation_expr when data is written (inserted or updated). STORED indicates that the value of the generated column is stored as a common column.

    NOTE:

    • The generation expression cannot refer to data other than the current row in any way. The generation expression cannot reference other generation columns or system columns. The generation expression cannot return a result set. No subquery, aggregate function, or window function can be used. The function called by the generation expression can only be an immutable function.
    • Default values cannot be specified for generated columns.
    • The generated column cannot be used as a part of the partition key.
    • Do not specify the generated column and the CASCADE, SET NULL, and SET DEFAULT actions of the ON UPDATE constraint at the same time. Do not specify the generated column and the SET NULL, and SET DEFAULT actions of the ON DELETE constraint at the same time.
    • The method of modifying and deleting generated columns is the same as that of common columns. Delete the common column that the generated column depends on. The generated column is automatically deleted. The type of the column on which the generated column depends cannot be changed.
    • The generated column cannot be directly written. In the INSERT or UPDATE statement, values cannot be specified for generated columns, but the keyword DEFAULT can be specified.
    • The permission control for generated columns is the same as that for common columns.
    • Columns cannot be generated for column-store tables and MOTs. In foreign tables, only postgres_fdw supports generated columns.
  • AUTO_INCREMENT

    Specifies an auto-increment column.

    For details, see AUTO_INCREMENT.

  • UNIQUE index_parameters

    UNIQUE ( column_name [, … ] ) index_parameters

    Specifies that a group of one or more columns of a table can contain only unique values.

    For the purpose of a unique constraint, null is not considered equal.

  • PRIMARY KEY index_parameters

    PRIMARY KEY ( column_name [, … ] ) index_parameters

    Specifies that a column or columns of a table can contain only unique (non-duplicate) and non-null values.

    Only one primary key can be specified for a table.

  • ENABLE [VALIDATE | NOVALIDATE] | DISABLE [VALIDATE | NOVALIDATE]

    • ENABLE( VALIDATE)(default): Enable constraints, create indexes, and enforce constraints on both existing data and newly added data.
    • ENABLE NOVALIDATE: Enable constraints and create indexes. For CHECK constraints, the constraints are only enforced for newly added data, regardless of the existing data in the table. For UNIQUE and PRIMARY KEY, indexes need to be established, so the constraints will be enforced for the existing data.
    • DISABLE( NOVALIDATE)(default): Disable constraints, delete indexes, and operations such as modifying the data of the constraint columns can be performed.
    • DISABLE VALIDATE: Disable constraints and delete indexes. Insertion, update and deletion operations on the table cannot be performed.
  • DEFERRABLE | NOT DEFERRABLE

    Controls whether the constraint can be deferred. A constraint that is not deferrable will be checked immediately after every command. Checking of constraints that are deferrable can be postponed until the end of the transaction using the SET CONSTRAINTS command. NOT DEFERRABLE is the default value. Currently, only UNIQUE constraints, primary key constraints, and foreign key constraints accept this clause. All the other constraints are not deferrable.

  • INITIALLY IMMEDIATE | INITIALLY DEFERRED

    If a constraint is deferrable, this clause specifies the default time to check the constraint.

    • If the constraint is INITIALLY IMMEDIATE (default value), it is checked after each statement.
    • If the constraint is INITIALLY DEFERRED, it is checked only at the end of the transaction.

    The constraint check time can be altered using the SET CONSTRAINTS statement.

  • USING INDEX TABLESPACE tablespace_name

    Allows selection of the tablespace in which the index associated with a UNIQUE or PRIMARY KEY constraint will be created. If not specified, default_tablespace is consulted, or the default tablespace in the database if default_tablespace is empty.

Examples

  • Example 1: Create a range-partitioned table tpcds.web_returns_p1. The table has eight partitions and their partition keys are of the integer type. The ranges of the partitions are: wr_returned_date_sk < 2450815, 2450815 ≤ wr_returned_date_sk < 2451179, 2451179 ≤ wr_returned_date_sk < 2451544, 2451544 ≤ wr_returned_date_sk < 2451910, 2451910 ≤ wr_returned_date_sk < 2452275, 2452275 ≤ wr_returned_date_sk < 2452640, 2452640 ≤ wr_returned_date_sk < 2453005, and wr_returned_date_sk ≥ 2453005.

    -- Create the tpcds.web_returns table.
    openGauss=# CREATE TABLE tpcds.web_returns
    (
        W_WAREHOUSE_SK            INTEGER               NOT NULL,
        W_WAREHOUSE_ID            CHAR(16)              NOT NULL,
        W_WAREHOUSE_NAME          VARCHAR(20)                   ,
        W_WAREHOUSE_SQ_FT         INTEGER                       ,
        W_STREET_NUMBER           CHAR(10)                      ,
        W_STREET_NAME             VARCHAR(60)                   ,
        W_STREET_TYPE             CHAR(15)                      ,
        W_SUITE_NUMBER            CHAR(10)                      ,
        W_CITY                    VARCHAR(60)                   ,
        W_COUNTY                  VARCHAR(30)                   ,
        W_STATE                   CHAR(2)                       ,
        W_ZIP                     CHAR(10)                      ,
        W_COUNTRY                 VARCHAR(20)                   ,
        W_GMT_OFFSET              DECIMAL(5,2)
    );
    -- Create a range-partitioned table tpcds.web_returns_p1.
    openGauss=# CREATE TABLE tpcds.web_returns_p1
    (
        WR_RETURNED_DATE_SK       INTEGER                       ,
        WR_RETURNED_TIME_SK       INTEGER                       ,
        WR_ITEM_SK                INTEGER               NOT NULL,
        WR_REFUNDED_CUSTOMER_SK   INTEGER                       ,
        WR_REFUNDED_CDEMO_SK      INTEGER                       ,
        WR_REFUNDED_HDEMO_SK      INTEGER                       ,
        WR_REFUNDED_ADDR_SK       INTEGER                       ,
        WR_RETURNING_CUSTOMER_SK  INTEGER                       ,
        WR_RETURNING_CDEMO_SK     INTEGER                       ,
        WR_RETURNING_HDEMO_SK     INTEGER                       ,
        WR_RETURNING_ADDR_SK      INTEGER                       ,
        WR_WEB_PAGE_SK            INTEGER                       ,
        WR_REASON_SK              INTEGER                       ,
        WR_ORDER_NUMBER           BIGINT                NOT NULL,
        WR_RETURN_QUANTITY        INTEGER                       ,
        WR_RETURN_AMT             DECIMAL(7,2)                  ,
        WR_RETURN_TAX             DECIMAL(7,2)                  ,
        WR_RETURN_AMT_INC_TAX     DECIMAL(7,2)                  ,
        WR_FEE                    DECIMAL(7,2)                  ,
        WR_RETURN_SHIP_COST       DECIMAL(7,2)                  ,
        WR_REFUNDED_CASH          DECIMAL(7,2)                  ,
        WR_REVERSED_CHARGE        DECIMAL(7,2)                  ,
        WR_ACCOUNT_CREDIT         DECIMAL(7,2)                  ,
        WR_NET_LOSS               DECIMAL(7,2)
    )
    WITH (ORIENTATION = COLUMN,COMPRESSION=MIDDLE)
    PARTITION BY RANGE(WR_RETURNED_DATE_SK)
    (
            PARTITION P1 VALUES LESS THAN(2450815),
            PARTITION P2 VALUES LESS THAN(2451179),
            PARTITION P3 VALUES LESS THAN(2451544),
            PARTITION P4 VALUES LESS THAN(2451910),
            PARTITION P5 VALUES LESS THAN(2452275),
            PARTITION P6 VALUES LESS THAN(2452640),
            PARTITION P7 VALUES LESS THAN(2453005),
            PARTITION P8 VALUES LESS THAN(MAXVALUE)
    );
    
    -- Import data from the example data table.
    openGauss=# INSERT INTO tpcds.web_returns_p1 SELECT * FROM tpcds.web_returns;
    
    -- Delete the P8 partition.
    openGauss=# ALTER TABLE tpcds.web_returns_p1 DROP PARTITION P8;
    
    -- Add a partition WR_RETURNED_DATE_SK with values ranging from 2453005 to 2453105.
    openGauss=# ALTER TABLE tpcds.web_returns_p1 ADD PARTITION P8 VALUES LESS THAN (2453105);
    
    -- Add a partition WR_RETURNED_DATE_SK with values ranging from 2453105 to MAXVALUE.
    openGauss=# ALTER TABLE tpcds.web_returns_p1 ADD PARTITION P9 VALUES LESS THAN (MAXVALUE);
    
    -- Delete the P8 partition.
    openGauss=# ALTER TABLE tpcds.web_returns_p1 DROP PARTITION FOR (2453005);
    
    -- Rename the P7 partition to P10.
    openGauss=# ALTER TABLE tpcds.web_returns_p1 RENAME PARTITION P7 TO P10;
    
    -- Rename the P6 partition to P11.
    openGauss=# ALTER TABLE tpcds.web_returns_p1 RENAME PARTITION FOR (2452639) TO P11;
    
    -- Query the number of rows in the P10 partition.
    openGauss=# SELECT count(*) FROM tpcds.web_returns_p1 PARTITION (P10);
     count  
    --------
     0
    (1 row)
    
    -- Query the number of rows in the P1 partition.
    openGauss=# SELECT COUNT(*) FROM tpcds.web_returns_p1 PARTITION FOR (2450815);
     count  
    --------
     0
    (1 row)
    
  • Example 2: Create a range-partitioned table tpcds.web_returns_p2. The table has eight partitions and their partition keys are of the integer type. The upper limit of the eighth partition is MAXVALUE.

    The ranges of the partitions are: wr_returned_date_sk < 2450815, 2450815 ≤ wr_returned_date_sk < 2451179, 2451179 ≤ wr_returned_date_sk < 2451544, 2451544 ≤ wr_returned_date_sk < 2451910, 2451910 ≤ wr_returned_date_sk < 2452275, 2452275 ≤ wr_returned_date_sk < 2452640, 2452640 ≤ wr_returned_date_sk < 2453005, and wr_returned_date_sk ≥ 2453005.

    The tablespace of the tpcds.web_returns_p2 partitioned table is example1. Partitions P1 to P7 have no specified tablespaces, and use the example1 tablespace of the tpcds.web_returns_p2 partitioned table. The tablespace of the P8 partitioned table is example2.

    Assume that the following data directories of the database nodes are empty directories for which user dwsadmin has the read and write permissions: /pg_location/mount1/path1, /pg_location/mount2/path2, /pg_location/mount3/path3, and /pg_location/mount4/path4.

    openGauss=# CREATE TABLESPACE example1 RELATIVE LOCATION 'tablespace1/tablespace_1';
    openGauss=# CREATE TABLESPACE example2 RELATIVE LOCATION 'tablespace2/tablespace_2';
    openGauss=# CREATE TABLESPACE example3 RELATIVE LOCATION 'tablespace3/tablespace_3';
    openGauss=# CREATE TABLESPACE example4 RELATIVE LOCATION 'tablespace4/tablespace_4';
    
    openGauss=# CREATE TABLE tpcds.web_returns_p2
    (
        WR_RETURNED_DATE_SK       INTEGER                       ,
        WR_RETURNED_TIME_SK       INTEGER                       ,
        WR_ITEM_SK                INTEGER               NOT NULL,
        WR_REFUNDED_CUSTOMER_SK   INTEGER                       ,
        WR_REFUNDED_CDEMO_SK      INTEGER                       ,
        WR_REFUNDED_HDEMO_SK      INTEGER                       ,
        WR_REFUNDED_ADDR_SK       INTEGER                       ,
        WR_RETURNING_CUSTOMER_SK  INTEGER                       ,
        WR_RETURNING_CDEMO_SK     INTEGER                       ,
        WR_RETURNING_HDEMO_SK     INTEGER                       ,
        WR_RETURNING_ADDR_SK      INTEGER                       ,
        WR_WEB_PAGE_SK            INTEGER                       ,
        WR_REASON_SK              INTEGER                       ,
        WR_ORDER_NUMBER           BIGINT                NOT NULL,
        WR_RETURN_QUANTITY        INTEGER                       ,
        WR_RETURN_AMT             DECIMAL(7,2)                  ,
        WR_RETURN_TAX             DECIMAL(7,2)                  ,
        WR_RETURN_AMT_INC_TAX     DECIMAL(7,2)                  ,
        WR_FEE                    DECIMAL(7,2)                  ,
        WR_RETURN_SHIP_COST       DECIMAL(7,2)                  ,
        WR_REFUNDED_CASH          DECIMAL(7,2)                  ,
        WR_REVERSED_CHARGE        DECIMAL(7,2)                  ,
        WR_ACCOUNT_CREDIT         DECIMAL(7,2)                  ,
        WR_NET_LOSS               DECIMAL(7,2)
    )
    TABLESPACE example1
    PARTITION BY RANGE(WR_RETURNED_DATE_SK)
    (
            PARTITION P1 VALUES LESS THAN(2450815),
            PARTITION P2 VALUES LESS THAN(2451179),
            PARTITION P3 VALUES LESS THAN(2451544),
            PARTITION P4 VALUES LESS THAN(2451910),
            PARTITION P5 VALUES LESS THAN(2452275),
            PARTITION P6 VALUES LESS THAN(2452640),
            PARTITION P7 VALUES LESS THAN(2453005),
            PARTITION P8 VALUES LESS THAN(MAXVALUE) TABLESPACE example2
    )
    ENABLE ROW MOVEMENT;
    
    -- Create a partitioned table using LIKE.
    openGauss=# CREATE TABLE tpcds.web_returns_p3 (LIKE tpcds.web_returns_p2 INCLUDING PARTITION);
    
    -- Change the tablespace of the P1 partition to example2.
    openGauss=# ALTER TABLE tpcds.web_returns_p2 MOVE PARTITION P1 TABLESPACE example2;
    
    -- Change the tablespace of the P2 partition to example3.
    openGauss=# ALTER TABLE tpcds.web_returns_p2 MOVE PARTITION P2 TABLESPACE example3;
    
    -- Split the P8 partition at 2453010.
    openGauss=# ALTER TABLE tpcds.web_returns_p2 SPLIT PARTITION P8 AT (2453010) INTO
    (
            PARTITION P9,
            PARTITION P10
    ); 
    
    -- Merge the P6 and P7 partitions into one.
    openGauss=# ALTER TABLE tpcds.web_returns_p2 MERGE PARTITIONS P6, P7 INTO PARTITION P8;
    
    -- Modify the migration attribute of the partitioned table.
    openGauss=# ALTER TABLE tpcds.web_returns_p2 DISABLE ROW MOVEMENT;
    -- Delete tables and tablespaces.
    openGauss=# DROP TABLE tpcds.web_returns_p1;
    openGauss=# DROP TABLE tpcds.web_returns_p2;
    openGauss=# DROP TABLE tpcds.web_returns_p3;
    openGauss=# DROP TABLESPACE example1;
    openGauss=# DROP TABLESPACE example2;
    openGauss=# DROP TABLESPACE example3;
    openGauss=# DROP TABLESPACE example4;
    
  • Example 3: Use START END to create and modify a range-partitioned table.

    Assume that /home/omm/startend_tbs1, /home/omm/startend_tbs2, /home/omm/startend_tbs3, and /home/omm/startend_tbs4 are empty directories for which user omm has the read and write permissions.

    -- Create tablespaces.
    openGauss=# CREATE TABLESPACE startend_tbs1 LOCATION '/home/omm/startend_tbs1';
    openGauss=# CREATE TABLESPACE startend_tbs2 LOCATION '/home/omm/startend_tbs2';
    openGauss=# CREATE TABLESPACE startend_tbs3 LOCATION '/home/omm/startend_tbs3';
    openGauss=# CREATE TABLESPACE startend_tbs4 LOCATION '/home/omm/startend_tbs4';
    
    -- Create a temporary schema.
    openGauss=# CREATE SCHEMA tpcds;
    openGauss=# SET CURRENT_SCHEMA TO tpcds;
    
    -- Create a partitioned table with the partition key of the integer type.
    openGauss=# CREATE TABLE tpcds.startend_pt (c1 INT, c2 INT) 
    TABLESPACE startend_tbs1 
    PARTITION BY RANGE (c2) (
        PARTITION p1 START(1) END(1000) EVERY(200) TABLESPACE startend_tbs2,
        PARTITION p2 END(2000),
        PARTITION p3 START(2000) END(2500) TABLESPACE startend_tbs3,
        PARTITION p4 START(2500),
        PARTITION p5 START(3000) END(5000) EVERY(1000) TABLESPACE startend_tbs4
    )
    ENABLE ROW MOVEMENT;
    
    -- View the information of the partitioned table.
    openGauss=# SELECT relname, boundaries, spcname FROM pg_partition p JOIN pg_tablespace t ON p.reltablespace=t.oid and p.parentid='tpcds.startend_pt'::regclass ORDER BY 1;
       relname   | boundaries |    spcname
    -------------+------------+---------------
     p1_0        | {1}        | startend_tbs2
     p1_1        | {201}      | startend_tbs2
     p1_2        | {401}      | startend_tbs2
     p1_3        | {601}      | startend_tbs2
     p1_4        | {801}      | startend_tbs2
     p1_5        | {1000}     | startend_tbs2
     p2          | {2000}     | startend_tbs1
     p3          | {2500}     | startend_tbs3
     p4          | {3000}     | startend_tbs1
     p5_1        | {4000}     | startend_tbs4
     p5_2        | {5000}     | startend_tbs4
     startend_pt |            | startend_tbs1
    (12 rows)
    
    -- Import data and check the data volume in a partition.
    openGauss=# INSERT INTO tpcds.startend_pt VALUES (GENERATE_SERIES(0, 4999), GENERATE_SERIES(0, 4999));
    openGauss=# SELECT COUNT(*) FROM tpcds.startend_pt PARTITION FOR (0);
     count
    -------
         1
    (1 row)
    
    openGauss=# SELECT COUNT(*) FROM tpcds.startend_pt PARTITION (p3);
     count
    -------
       500
    (1 row)
    
    -- Add partitions [5000, 5300), [5300, 5600), [5600, 5900), and [5900, 6000).
    openGauss=# ALTER TABLE tpcds.startend_pt ADD PARTITION p6 START(5000) END(6000) EVERY(300) TABLESPACE startend_tbs4;
    
    -- Add the partition p7, specified by MAXVALUE.
    openGauss=# ALTER TABLE tpcds.startend_pt ADD PARTITION p7 END(MAXVALUE);
    
    -- Rename the partition p7 to p8.
    openGauss=# ALTER TABLE tpcds.startend_pt RENAME PARTITION p7 TO p8;
    
    -- Delete the partition p8.
    openGauss=# ALTER TABLE tpcds.startend_pt DROP PARTITION p8;
    
    -- Rename the partition where 5950 is located to p71.
    openGauss=# ALTER TABLE tpcds.startend_pt RENAME PARTITION FOR(5950) TO p71;
    
    -- Split the partition [4000, 5000) where 4500 is located.
    openGauss=# ALTER TABLE tpcds.startend_pt SPLIT PARTITION FOR(4500) INTO(PARTITION q1 START(4000) END(5000) EVERY(250) TABLESPACE startend_tbs3);
    
    -- Change the tablespace of the partition p2 to startend_tbs4.
    openGauss=# ALTER TABLE tpcds.startend_pt MOVE PARTITION p2 TABLESPACE startend_tbs4;
    
    -- View the partition status.
    openGauss=# SELECT relname, boundaries, spcname FROM pg_partition p JOIN pg_tablespace t ON p.reltablespace=t.oid and p.parentid='tpcds.startend_pt'::regclass ORDER BY 1;
       relname   | boundaries |    spcname
    -------------+------------+---------------
     p1_0        | {1}        | startend_tbs2
     p1_1        | {201}      | startend_tbs2
     p1_2        | {401}      | startend_tbs2
     p1_3        | {601}      | startend_tbs2
     p1_4        | {801}      | startend_tbs2
     p1_5        | {1000}     | startend_tbs2
     p2          | {2000}     | startend_tbs4
     p3          | {2500}     | startend_tbs3
     p4          | {3000}     | startend_tbs1
     p5_1        | {4000}     | startend_tbs4
     p6_1        | {5300}     | startend_tbs4
     p6_2        | {5600}     | startend_tbs4
     p6_3        | {5900}     | startend_tbs4
     p71         | {6000}     | startend_tbs4
     q1_1        | {4250}     | startend_tbs3
     q1_2        | {4500}     | startend_tbs3
     q1_3        | {4750}     | startend_tbs3
     q1_4        | {5000}     | startend_tbs3
     startend_pt |            | startend_tbs1
    (19 rows)
    
    -- Delete tables and tablespaces.
    openGauss=# DROP SCHEMA tpcds CASCADE;
    openGauss=# DROP TABLESPACE startend_tbs1;
    openGauss=# DROP TABLESPACE startend_tbs2;
    openGauss=# DROP TABLESPACE startend_tbs3;
    openGauss=# DROP TABLESPACE startend_tbs4;
    
  • Example 4: Create interval partitioned table sales. The table initially contains two partitions and the partition key is of the DATE type.

    Ranges of the two partitions are as follows: time_id < '2019-02-01 00:00:00' and '2019-02-01 00:00:00' ≤ time_id < '2019-02-02 00:00:00', respectively.

    -- Create table sales.
    openGauss=# CREATE TABLE sales
    (prod_id NUMBER(6),
     cust_id NUMBER,
     time_id DATE,
     channel_id CHAR(1),
     promo_id NUMBER(6),
     quantity_sold NUMBER(3),
     amount_sold NUMBER(10,2)
    )
    PARTITION BY RANGE (time_id)
    INTERVAL('1 day')
    ( PARTITION p1 VALUES LESS THAN ('2019-02-01 00:00:00'),
      PARTITION p2 VALUES LESS THAN ('2019-02-02 00:00:00')
    );
    
    -- Insert data into partition p1.
    openGauss=# INSERT INTO sales VALUES(1, 12, '2019-01-10 00:00:00', 'a', 1, 1, 1);
    
    -- Insert data into partition p2.
    openGauss=# INSERT INTO sales VALUES(1, 12, '2019-02-01 00:00:00', 'a', 1, 1, 1);
    
    -- View the partition information.
    openGauss=# SELECT t1.relname, partstrategy, boundaries FROM pg_partition t1, pg_class t2 WHERE t1.parentid = t2.oid AND t2.relname = 'sales' AND t1.parttype = 'p';
     relname | partstrategy |       boundaries
    ---------+--------------+-------------------------
     p1      | r            | {"2019-02-01 00:00:00"}
     p2      | r            | {"2019-02-02 00:00:00"}
    (2 rows)
    
    -- If the data to be inserted does not match any partition, create a partition and insert the data into the new partition.
    -- The range of the new partition is '2019-02-05 00:00:00' ≤ time_id < '2019-02-06 00:00:00'.
    openGauss=# INSERT INTO sales VALUES(1, 12, '2019-02-05 00:00:00', 'a', 1, 1, 1);
    
    -- If the data to be inserted does not match any partition, create a partition and insert the data into the new partition.
    -- The range of the new partition is '2019-02-03 00:00:00' ≤ time_id < '2019-02-04 00:00:00'.
    openGauss=# INSERT INTO sales VALUES(1, 12, '2019-02-03 00:00:00', 'a', 1, 1, 1);
    
    -- View the partition information.
    openGauss=# SELECT t1.relname, partstrategy, boundaries FROM pg_partition t1, pg_class t2 WHERE t1.parentid = t2.oid AND t2.relname = 'sales' AND t1.parttype = 'p';
     relname | partstrategy |       boundaries
    ---------+--------------+-------------------------
     sys_p1  | i            | {"2019-02-06 00:00:00"}
     sys_p2  | i            | {"2019-02-04 00:00:00"}
     p1      | r            | {"2019-02-01 00:00:00"}
     p2      | r            | {"2019-02-02 00:00:00"}
    (4 rows)
    
  • Example 5: Create list partitioned table test_list. The table initially contains four partitions and the partition key is of the INT type. The ranges of the four partitions are 2000, 3000, 4000, and 5000 respectively.

    -- Create the test_list table.
    openGauss=# create table test_list (col1 int, col2 int)
    partition by list(col1)
    (
    partition p1 values (2000),
    partition p2 values (3000),
    partition p3 values (4000),
    partition p4 values (5000)
    );
    
    -- Insert data.
    openGauss=# INSERT INTO test_list VALUES(2000, 2000);
    INSERT 0 1
    openGauss=# INSERT INTO test_list VALUES(3000, 3000);
    INSERT 0 1
    
    -- View the partition information.
    openGauss=# SELECT t1.relname, partstrategy, boundaries FROM pg_partition t1, pg_class t2 WHERE t1.parentid = t2.oid AND t2.relname = 'test_list' AND t1.parttype = 'p';
     relname | partstrategy | boundaries
    ---------+--------------+------------
     p1      | l            | {2000}
     p2      | l            | {3000}
     p3      | l            | {4000}
     p4      | l            | {5000}
    (4 rows)
    
    -- The inserted data does not match the partition, and an error is reported.
    openGauss=# INSERT INTO test_list VALUES(6000, 6000);
    ERROR:  inserted partition key does not map to any table partition
    
    -- Add a partition.
    openGauss=# alter table test_list add partition p5 values (6000);
    ALTER TABLE
    openGauss=# SELECT t1.relname, partstrategy, boundaries FROM pg_partition t1, pg_class t2 WHERE t1.parentid = t2.oid AND t2.relname = 'test_list' AND t1.parttype = 'p';
     relname | partstrategy | boundaries
    ---------+--------------+------------
     p5      | l            | {6000}
     p4      | l            | {5000}
     p1      | l            | {2000}
     p2      | l            | {3000}
     p3      | l            | {4000}
    (5 rows)
    openGauss=# INSERT INTO test_list VALUES(6000, 6000);
    INSERT 0 1
    
    -- Exchange data between the partitioned table and ordinary table.
    openGauss=# create table t1 (col1 int, col2 int);
    CREATE TABLE
    openGauss=# select * from test_list partition (p1);
     col1 | col2
    ------+------
     2000 | 2000
    (1 row)
    openGauss=# alter table test_list exchange partition (p1) with table t1;
    ALTER TABLE
    openGauss=# select * from test_list partition (p1);
     col1 | col2
    ------+------
    (0 rows)
    openGauss=# select * from t1;
     col1 | col2
    ------+------
     2000 | 2000
    (1 row)
    
    -- Truncate the partition.
    openGauss=# select * from test_list partition (p2);
     col1 | col2
    ------+------
     3000 | 3000
    (1 row)
    openGauss=# alter table test_list truncate partition p2;
    ALTER TABLE
    openGauss=# select * from test_list partition (p2);
     col1 | col2
    ------+------
    (0 rows)
    
    -- Delete the partition.
    openGauss=# alter table test_list drop partition p5;
    ALTER TABLE
    openGauss=# SELECT t1.relname, partstrategy, boundaries FROM pg_partition t1, pg_class t2 WHERE t1.parentid = t2.oid AND t2.relname = 'test_list' AND t1.parttype = 'p';
     relname | partstrategy | boundaries
    ---------+--------------+------------
     p4      | l            | {5000}
     p1      | l            | {2000}
     p2      | l            | {3000}
     p3      | l            | {4000}
    (4 rows)
    
    openGauss=# INSERT INTO test_list VALUES(6000, 6000);
    ERROR:  inserted partition key does not map to any table partition
    
    -- Delete the partitioned table.
    openGauss=# drop table test_list;
    
  • Example 6: Create a hash partitioned table test_hash. The table initially contains two partitions and the partition key is of the INT type.

    -- Create the test_hash table.
    openGauss=# create table test_hash (col1 int, col2 int)
    partition by hash(col1)
    (
    partition p1,
    partition p2
    );
    
    -- Insert data.
    openGauss=# INSERT INTO test_hash VALUES(1, 1);
    INSERT 0 1
    openGauss=# INSERT INTO test_hash VALUES(2, 2);
    INSERT 0 1
    openGauss=# INSERT INTO test_hash VALUES(3, 3);
    INSERT 0 1
    openGauss=# INSERT INTO test_hash VALUES(4, 4);
    INSERT 0 1
    
    -- View the partition information.
    openGauss=# SELECT t1.relname, partstrategy, boundaries FROM pg_partition t1, pg_class t2 WHERE t1.parentid = t2.oid AND t2.relname = 'test_hash' AND t1.parttype = 'p';
     relname | partstrategy | boundaries
    ---------+--------------+------------
     p1      | h            | {0}
     p2      | h            | {1}
    (2 rows)
    
    -- View the data.
    openGauss=# select * from test_hash partition (p1);
     col1 | col2
    ------+------
        3 |    3
        4 |    4
    (2 rows)
    
    openGauss=# select * from test_hash partition (p2);
     col1 | col2
    ------+------
        1 |    1
        2 |    2
    (2 rows)
    
    -- Exchange data between the partitioned table and ordinary table.
    openGauss=# create table t1 (col1 int, col2 int);
    CREATE TABLE
    openGauss=# alter table test_hash exchange partition (p1) with table t1;
    ALTER TABLE
    openGauss=# select * from test_hash partition (p1);
     col1 | col2
    ------+------
    (0 rows)
    openGauss=# select * from t1;
     col1 | col2
    ------+------
        3 |    3
        4 |    4
    (2 rows)
    
    -- Truncate the partition.
    openGauss=# alter table test_hash truncate partition p2;
    ALTER TABLE
    openGauss=#  select * from test_hash partition (p2);
     col1 | col2
    ------+------
    (0 rows)
    
    -- Delete the partitioned table.
    openGauss=# drop table test_hash;
    

Helpful Links

ALTER TABLE PARTITION and DROP TABLE

Feedback
编组 3备份
    openGauss 2024-10-03 04:45:44
    cancel