DCF Parameters Settings

NOTE: In the Lite scenario, DCF functions of openGauss are unavailable, but the primary node selection capability is provided. If this capability is required, you need to configure it.

enable_dcf

Parameter description: Specifies whether to enable the DCF mode. This parameter cannot be modified.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: Boolean. The value can be on or off. The value on indicates that the current installation mode is DCF, and the value off indicates that the current installation mode is not DCF.

Default value: off

dcf_ssl

Parameter description: Specifies whether to enable SSL. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: Boolean. The value can be on or off. The value on indicates that SSL is used, and the value off indicates that SSL is not used.

Default value: on

dcf_config

Parameter description: Specifies the customized configuration information during installation. This parameter cannot be modified.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Default value: a string, which is specified by users during installation

dcf_data_path

Parameter description: Specifies the DCF data path. This parameter cannot be modified.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Default value: a string, which is the dcf_data directory under the data directory of the DN

dcf_log_path

Parameter description: Specifies the DCF log path. This parameter cannot be modified.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Default value: a string, which is the dcf_log directory under the data directory of the DN.

dcf_node_id

Parameter description: Specifies the ID of the DN where the DCF is located. This parameter is defined by users during installation and cannot be modified.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Default value: an integer, which is specified by users during installation

dcf_max_workers

Parameter description: Specifies the number of DCF callback function threads. If the number of nodes exceeds 7, increase the value of this parameter (for example, to 40). Otherwise, the primary node may remain in the promoting state and the log replication between the primary and standby nodes has no progress.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 10 to 262143

Default value: 10

dcf_truncate_threshold

Parameter description: Specifies the threshold for a DN to truncate DCF logs.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 2147483647

Default value: 100000

dcf_election_timeout

Parameter description: Specifies the timeout interval for selecting the DCF leader and follower. The election timeout interval depends on the status of the network between DNs. If the timeout interval is short and the network quality is poor, timeout occurs. After the network recovers, the election becomes normal. You are advised to set a proper timeout interval based on the current network status. Restriction on the DCF node clock: The maximum clock difference between DCF nodes is less than half of the election timeout period.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 600, in seconds

Default value: 3

dcf_run_mode

Parameter description: Specifies the DCF election mode. The value 0 indicates that the automatic DCF election mode is enabled, and the value 2 indicates that the DCF election mode is disabled. Currently, the election mode can be disabled only in minority restoration scenarios. If the election mode is disabled, the cluster will become unavailable.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: Enumerated type. The value can be 0 or 2.

Default value: 0

dcf_log_level

Parameter description: Specifies the DCF log level.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: a string

  • Disable the log function: NONE, indicating that the log function is disabled and cannot be used for the following log levels:

  • Enable the log function: RUN_ERR|RUN_WAR|RUN_INF|DEBUG_ERR|DEBUG_WAR|DEBUG_INF|TRACE|PROFILE|OPER

    You can select a string from the preceding strings and use vertical bars (|) to combine the strings. The log level cannot be left blank.

Default value: RUN_ERR|RUN_WAR|DEBUG_ERR|OPER|RUN_INF|PROFILE

dcf_log_backup_file_count

Parameter description: Specifies the number of DCF run log backups.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 100

Default value: 10

dcf_max_log_file_size

Parameter description: Specifies the maximum size of a DCF run log file.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 1000, in MB

Default value: 10

dcf_socket_timeout

Parameter description: Specifies the timeout interval for the DCF communication module to connect to the socket. This parameter takes effect upon the system restart. In an environment where the network quality is poor, if the timeout interval is set to a small value, a connection may fail to be set up. In this case, you need to increase the value.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 10 to 600000, in ms

Default value: 5000

dcf_connect_timeout

Parameter description: Specifies the timeout interval for the DCF communication module to set up a connection. This parameter takes effect upon the system restart. In an environment where the network quality is poor, if the timeout interval is set to a small value, the connection may fail to be set up. In this case, you need to increase the value.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 10 to 600000, in ms

Default value: 60000

dcf_mec_fragment_size

Parameter description: Specifies the fragment size of the DCF communication module. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 32 to 10240, in kB

Default value: 64

dcf_stg_pool_max_size

Parameter description: Specifies the maximum size of the memory pool of the DCF storage module. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 32 to 2147483647, in MB

Default value: 2048

dcf_stg_pool_init_size

Parameter description: Specifies the minimum size of the memory pool of the DCF storage module. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 32 to 2147483647, in MB

Default value: 32

dcf_mec_pool_max_size

Parameter description: Specifies the maximum size of the memory pool of the DCF communication module. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 32 to 2147483647, in MB

Default value: 200

dcf_flow_control_disk_rawait_threshold

Parameter description: Specifies the disk waiting threshold for DCF flow control.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 0 to 2147483647, in μs

Default value: 100000

dcf_flow_control_net_queue_message_num_threshold

Parameter description: Specifies the threshold for the number of messages in a network queue for DCF flow control.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 0 to 2147483647

Default value: 1024

dcf_flow_control_cpu_threshold

Parameter description: Specifies the threshold for DCF CPU flow control.

This parameter is a SIGHUP parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 0 to 2147483647, in percentage (%)

Default value: 100

dcf_mec_batch_size

Parameter description: Specifies the number of batch messages for DCF communication. When the value is 0, the DCF automatically adjusts the value based on the network and the amount of data to be written. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 0 to 1024

Default value: 0

dcf_mem_pool_max_size

Parameter description: Specifies the maximum DCF memory. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 32 to 2147483647, in MB

Default value: 2048

dcf_mem_pool_init_size

Parameter description: Specifies the initial size of the DCF memory. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 32 to 2147483647, in MB

Default value: 32

dcf_compress_algorithm

Parameter description: Specifies the compression algorithm for DCF run log transmission. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer

  • 0 indicates no compression.
  • 1 indicates the ZSTD compression algorithm.
  • 2 indicates the LZ4 compression algorithm.

Default value: 0

dcf_compress_level

Parameter description: Specifies the compression level for DCF log transmission. This parameter takes effect upon the system restart. Before this parameter takes effect, a valid compression algorithm must be configured, that is, the dcf_compress_algorithm parameter is set.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 22

If compression is disabled, the configured compression level does not take effect.

Default value: 1

dcf_mec_channel_num

Parameter description: Specifies the number of DCF communication channels. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 64

Default value: 1

dcf_rep_append_thread_num

Parameter description: Specifies the number of DCF log replication threads. This parameter takes effect upon the system restart.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 1000

Default value: 2

dcf_mec_agent_thread_num

Parameter description: Specifies the number of DCF communication working threads. This parameter takes effect upon the system restart. It is recommended that the value of dcf_mec_agent_thread_num be greater than or equal to 2 x Number of nodes x Value of dcf_mec_channel_num.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 1000

Default value: 10

dcf_mec_reactor_thread_num

Parameter description: Specifies the number of reactor threads used by the DCF. This parameter takes effect upon the system restart. It is recommended that the ratio of the value of dcf_mec_reactor_thread_num to the value of dcf_mec_agent_thread_num be 1:40.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: an integer ranging from 1 to 100

Default value: 1

dcf_log_file_permission

Parameter description: Specifies the attribute of the DCF run log file. The parameter setting takes effect after the system is restarted. This parameter is configured during installation and cannot be modified. To allow other users in the same group to access logs, ensure that all parent directories can be accessed by other users in the same group. That is, if dcf_log_path_permission is set to 750, dcf_log_file_permission can only be set to 600 or 640. If dcf_log_path_permission is set to 700, dcf_log_file_permission must be set to 600.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: enumerated type. The value can be 600 or 640.

Default value: 600

dcf_log_path_permission

Parameter description: Specifies the attribute of the DCF run log directory. The parameter setting takes effect after the system is restarted. This parameter is configured during installation and cannot be modified. To allow other users in the same group to access the log path, set this parameter to 750. Otherwise, set this parameter to 700.

This parameter is a POSTMASTER parameter. Set it based on instructions provided in Table 1.

Value range: enumerated type. The value can be 700 or 750.

Default value: 700

Feedback
编组 3备份
    openGauss 2024-07-19 01:03:13
    cancel